Pay4Later

Buy the Audio Technica PRO42 Miniature Condenser Boundary Mic with INTEREST FREE FINANCE

Spend £ 232 more to qualify for payment by finance.

Audio Technica PRO42 Miniature Condenser Boundary Mic

The PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond

Key Features:

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

    view all Audio Technica products

    Product Code: 100073316

    Pre-Order from our next delivery

    £103.00

    The PRO42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

     

     

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 70-14,000 Hz
  • Open Circuit Sensitivity: -38 dB (12.5 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 105 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 9-52V DC, 2 mA typical
  • Weight: 1.2 oz (35 g)
  • Dimensions: 1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height
  • Output Connector: 3-pin XLRM-type on cable
  • Cable: 25´ (7.6 m) long, permanently attached
  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25´ (7.6 m) cable permanently attached between microphone and XLRM-type connector
  • Spend £ 232 more to qualify for payment by finance.

    Write a review for the Audio Technica PRO42 Miniature Condenser Boundary Mic

    How do you rate this product? *

    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the Audio Technica PRO42 Miniature Condenser Boundary Mic Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields