Buy the QSC E15 Passive PA Speaker with INTEREST FREE FINANCE

From just £36.13 per month

QSC E15 Passive PA Speaker

The E15 is a two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil

Key Features:

  • High output, professional quality sound with E15 – 500 W continuous power
  • Advanced digital signal processing tunings and options using QSC GXDPLD amplifiers or TouchMix digital mixers
  • Titanium diaphragm for high fidelity and long life
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket

    Product Code: 100268359

    Pre-Order from our next delivery


    The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.

    E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

    Model E15
    Configuration 1 x 15-inch, 2-way, non-powered 
    Frequency Range (-6 dB) 55Hz – 20kHz
    Power capacity²: continuous/peak 500 W / 2000 W
    Sensitivity  97dB, 1W@1m
    Coverage Angle 75° conical DMT
    Output (peak SPL @ 1 m) 130dB





    381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil

    38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver 

    Nominal Impedance
    Cross-over Full-range only 1.55kHz 
    Input connectors  2x NL4, 1 x barrier strip
    Enclosure  Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
    Mounting and suspension  6 x M8 suspension points, dual angle, 35mm pole-socket
    Net weight 31 kg / 68 lbs
    Shipping weight 34 kg / 75 lbs 




    Write a review for the QSC E15 Passive PA Speaker

    How do you rate this product? *

    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the QSC E15 Passive PA Speaker Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields