PRESONUS Temblor T10 Active Studio Subwoofer

Active Studio Subwoofer For Use With Eris And Sceptre Studio Monitors

Key Features:

  • A solid foundation for mixing
  • Tight, clean, responsive bass
  • A perfect fit with your full-range monitors
  • The central hub of your monitoring setup
  • Accuracy defined

 

    view all PRESONUS products

    Product Code: 100268129

    Pre-Order from our next delivery

    £339.00

    Buy the PRESONUS Temblor T10 Active Studio Subwoofer with INTEREST FREE FINANCE

    From just per month
    Finance Options

    Presonus' Temblor T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

     

    Tight, clean, responsive bass
    The Temblor T10’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.

    A perfect fit with your full-range monitors
    Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the flattest possible response. The Temblor T10 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.

    The central hub of your monitoring setup
    Temblor T10 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofer’s upper range. A polarity invert ensures your system is in phase.

    The Temblor T10 also features a momentary footswitch (included), making it easy to compare your mix with or without sub-bass frequencies and ensure it will sound good on a wide variety of systems.

    Accuracy defined
    When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T10 subwoofers are the natural sub-bass extension for virtually any full-range monitoring system. Hear the Temblor T10 at your favorite PreSonus® dealer.

    Technical Specifications

    Inputs 
     

    2- Balanced XLR

    2- Balanced ¼” TRS

    2- Unbalanced RCA

    Outputs 
     

    2- Balanced XLR (full range with 80 Hz HPF option)

    2- Balanced ¼” TRS (full range with 80 Hz HPF option)

    1- Balanced XLR (Sub Out)

    Performance 
    Frequency Response 20 Hz – 200 Hz
    Low Pass Filter Frequency 50 – 130 Hz (variable)
    Signal-to-Noise Ratio >98 dB (A weighted)
    THD 0.019% @ power <160W
    Amplifier Power 250W peak, 170W RMS
    Power Consumption 230W
    Amplifier Type Class AB
    Peak SPL at 1m 113 dB
    Woofer 10” glass-composite, front-firing
    Acoustic Port Front-firing bass reflex
    User Controls 
    Input Gain Range -30 to +6 dB
    Polarity Switch 0° or 180°
    Low Pass Filter Control 50 Hz to 130 Hz
    Ground Lift Switch On/Off
    High Pass Filter Switch On/Off
    Bypass Footswitch On/Off
    Protection 
     

    RF interference

    Output-current limiting

    Over-temperature

    Turn-on/off transient

    Subsonic filter

    External mains fuse

    Power 
      100-120V ~50/60 Hz or 220-240V ~50/60 Hz
    Cabinet 
      Vinyl-laminated MDF
    Physical 
    Width 12.6” (320 mm)
    Depth 15.75” (400 mm)
    Height 15.75” (400 mm)
    Weight 39.46 lbs (17.9 kg)

    As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.

    Main components

  • 10-inch, front-firing, glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

  • Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • Ground-lift switch

  • Power and safety

  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement

  • Inputs and outputs

  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼” TRS outputs
  • XLR subwoofer output for connecting a second Temblor® T10
  •  

     

    Write a review for the PRESONUS Temblor T10 Active Studio Subwoofer

    How do you rate this product? *

    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the PRESONUS Temblor T10 Active Studio Subwoofer Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields