Pay4Later

Buy the KORG MS20 Synthesizer Kit with INTEREST FREE FINANCE

From just £36.13 per month

KORG MS20 Synthesizer Kit

The MS-20 Kit is a 37-key analog synthesizer self-assembly kit with USB/MIDI

Key Features:

  • A full-size MS-20 that you can assemble yourself
  • Both the early and late versions of the filter are provided
  • Overseen by the engineers of the original MS-20;
    a complete replication of the original analog circuitry:
    - 2VCO / 2VCA / 2VCF / 2EG / 1LFO structure
    - External signal processor (ESP)
    - Extremely flexible patching system
  • MIDI IN and USB connector
  • Powered by an AC adapter
  • Replicates every detail of the original, down to the package binding and the included manual

    view all KORG products

    Product Code: 200004028

    Pre-Order from our next delivery

    £1,079.00
    Creating an instrument your own hands is the part of the true enjoyment of an analog synthesizer. The MS-20 Kit lets you obtain a real, full-sized MS-20 by assembling it yourself. It goes without saying that, just like the MS-20 mini released in January 2013, the engineers who developed the original MS-20 have overseen this project - ensuring that its historic sound is reproduced with complete fidelity. In addition, the MS-20 Kit provides the filters from both the early and late versions of this classic instrument and it even allows you to switch between them.

    Package contents of the MS-20 Kit

    • Front panel, Rear panel, Bottom panel, L-shaped bracket(x 2), Left side pane, Right side panel, Left side shield,
    • Right side shield, Panel support, Knob (large) (x 7), Knob (small) (x 29), Rubber bushing (x 10), Rubber feet (x 4),
    • Cord hook, Nut 12 mm - shiny (x 36), Washer (x 36), Screw (x 36), Nut 11 mm - matte (x 30), Nut 11 mm - shiny (x 6),
    • Keyboard unit, Wheel unit, Rear jack circuit board unit, Left panel circuit board, Right panel circuit board & VR circuit board
    • (small), VR circuit board (large), Power supply circuit board, Box-end wrench (included)


    Main Specifications

    Keyboard:  C - C: 37-key (3 octaves)
    Main Controller: Control wheel (center click)
    Momentary switch -->GND
    Input/Output  : Signal input (Monoral Phone Jack), Signal output (Monoral Phone Jack, 2V p-p output impedance 3.5k O), Head phones output (Stereo Phone Jack, 33 O 48mW), DC12V, MIDI IN, USB(Type B)
    Power Consumption: 9W
    Power Supply: DC12V
    Dimensions:  (W x D x H)
    573 × 316 × 248 mm / 22.56 x 12.44 x 9.76 inches
    Weight: 6.3 kg / 13.89 lbs.
    Accessories:  AC adaptor (12V/1.5A), Patch Cord x 10

    Specifications in details

    Control Section
    1. Keyboard
    : C ~ C 37Keys(3 octaves)
    2. Voltage Controlled Oscillator 1 (VCO 1)
    : Scale (32´, 16´, 8´, 4´) (6 octaves, +cent, -cent)
    : Wave form(Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
    : Pulse width adjust 1:1 ~ 1:infinity
    3. Voltage Controlled Oscillator 2 (VCO 2)
    : Scale (16´, 8´, 4´, 2´) (6 octaves, +cent, -cent)
    : Wave form(Sawtooth, Square, Pulse, Ring modulator) (4 modes)
    : Pitch( ± 1 octave)
    4. VCO Master control : Master tune( ± 100cent)
    : Portamento(max. 10sec)
    : Frequency modulation intensity by MG/T.EXT(-5V ~ +5V)
    : Frequency modulation intensity by EG1/EXT(-5V ~ 0V)
    5. VCO Mixer
    : VCO 1 Level
    : VCO 2 Level
    6. Voltage Controlled High Pass Filter (VCF HPF)
    : Cutoff frequency(50Hz ~ 15,000Hz)
    : Peak(flat ~ self OSC)
    : Cutoff frequency modulation intensity by MG/T.EXT(-5V ~ +5V)
    : Cutoff frequency modulation intensity by EG2/EXT(-5V ~ +5V)
    7. Voltage Controlled Low Pass Filter (VCF LPF)
    : Cutoff frequency(50Hz ~ 15,000Hz)
    : Peak(flat ~ self OSC)
    : Cutoff frequency modulation intensity by MG/T.EXT(-5V ~ +5V)
    : Cutoff frequency modulation intensity by EG2/EXT(-5V ~ +5V)
    8. Envelope Generator 1
    : Delay time(10sec)
    : Attack time(10sec)
    : Release time(10sec)
    9. Envelope Generator 2
    : Hold time(20sec)
    : Attack time(10sec)
    : Decay time(10sec)
    : Sustain level(0V ~ 5V)
    : Release time(10sec)
    10. Modulation Generator (LFO)
    : Wave form(Negative Sawtooth ~ Triangle ~ Positive Sawtooth, Wide Pulse ~ Square ~ Narrow Pulse)
    : Frequency(0.1Hz ~ 20Hz)
    11. Manual controller
    : Cntrol wheel(center click)
    : Momentary switch -->GND
    12. Power switch and Volume
    : Volume
    13. Indicator
    : LED(KBD trigger, Modulation Generator rate, Power ON)
    External Signal Processor
    1. Control section
    : Input signal level
    : Low cut frequency(50Hz ~ 2,500Hz)
    : High cut frequency(100Hz ~ 5,000Hz)
    : CV adjust
    : Threshold level
    2. Input and Output
    : Signal In
    : Amplifier Out
    : Band pass filter Out
    : CV Out(0 ~ +8.4V)
    : ENV Out(0 ~ +5V)
    : Trig Out(+5V-->GND)
    3. Indicator(LED)
    : Peak indicator
    : Trigger indicator
    Patch Panel
    1. Keyboard
    : Keyboard control voltage output(Exponential) (0 - +8V)
    : Keyboard trigger output(+5V-->GND)
    : VCO-1 + VCO-2 control voltage input(Linear response)(0 - +8V)
    : VCO-2 control voltage input(Linear response) (0 - +8V)
    2. VCO
    : VCO-1 + VCO-2 external frequency control input(OCT/V)(-5V - +5V)
    3. VCF
    : External signal input(3Vp-p max.)
    : External High pass filter cutoff frequency control input(2OCT/V)(-5V - +5V)
    : External Low pass filter cutoff frequency control input(2OCT/V)(-5V - +5V)
    4. VCO + VCF
    : Total external modulation input(T.EXT)(-5V - +5V)
    5. VCA
    : External initial gain control input(0 - +5V)
    6. EG
    : EG 1 envelope signal normal output(0V - +5V)
    : EG 1 envelope signal reverse output(+5V - 0V)
    : EG 1 + EG 2 trigger input(-->GND)
    : EG 1 trigger input(-->GND)
    : EG 2 envelope signal reverse output(+5V - 0V)
    7. MG
    : Triangle output(Negative Sawtooth - Triangle - Positive Sawtooth)(5Vp-p)
    : Rectangle output(Wide Pulse - Square - Narrow Pulse)(0 - +5V)
    8. Noise Generator
    : Pink noise output(5Vp-p)
    : White noise output(5Vp-p)
    9. Sample and Hold
    : Clock trigger input(-->GND)
    : Sample signal input(5Vp-p max.)
    : S/H output(5Vp-p max.)
    10. Modulation VCA
    : Control voltage input(0 - +5V)
    : Signal input(-5V - +5V)
    : Signal output(-5V - +5V)
    11. Manual controller
    : Control wheel output(-5V+5V)
    : Momentary switch output(-->GND)
    12. Signal out
    : Signal output(2Vp-p output impedance 3.5k O )
    13. Head phones
    : Head phones output(33 O 48mW)
    14. USB
    : Type B, USB-MIDI Input/Output
    *Only note messages (velocity is not used) can be transmitted and received.
    15. MIDI
    : MIDI Input
    *Only note messages (velocity is not used) can be transmitted and received.
    - See more at: http://www.korg.com/us/products/dj/ms_20kit/page_2.php#sthash.a2Zbrf5j.dpuf

  • A full-size MS-20 that you can assemble yourself
  • Both the early and late versions of the filter are provided
  • Overseen by the engineers of the original MS-20;
    a complete replication of the original analog circuitry:
    - 2VCO / 2VCA / 2VCF / 2EG / 1LFO structure
    - External signal processor (ESP)
    - Extremely flexible patching system
  • MIDI IN and USB connector
  • Powered by an AC adapter
  • Replicates every detail of the original, down to the package binding and the included manual
  • FINANCE CALCULATOR

    Write a review for the KORG MS20 Synthesizer Kit

    How do you rate this product? *

    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the KORG MS20 Synthesizer Kit Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields