Trust pilot
Trust pilot
Trust pilot
Trust pilot

DBX 234XS

DBX 234xs Stereo 2/3 Way, Mono 4-Way Crossover with XLR Connectors

    view all DBX products

    Product Code: 100083356

    Pre Order

    £264.00

    Pricematch:

    Contact us via online chat module to request pricematch

    "The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers."
  • Input Connectors: XLR
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: Balanced >50k ohm, unbalanced >25k ohm
  • Max Input: >+22dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz
  • Output Connectors: XLR
  • Output Type: Impedance-balanaced/unbalanced, RF filtered
  • Output Impedance: Balanced 60 ohm, unbalanced 30 ohm
  • Max Output: >+21dBu balanced/unbalanced into 2k ohms or greater
  • Bandwidth: 20Hz to 20kHz, +/-0.5dB
  • Frequency Response: 90 kHz, +0/-3 dB
  • Signal to Noise Ratio: Ref: +4 dBu, 22 kHz measurement bandwidth
  • Signal-to-Noise (Stereo Mode): >94dB (Low Output), >93dB (Mid Output), >90dB (High Output)
  • Signal-to-Noise (Mono Mode): >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output)
  • Dynamic Range: > 106 dB, unweighted, any output
  • THD+Noise:
  • Interchannel Crosstalk:
  • Crossover Frequencies (Stereo Mode): Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)
  • Crossover Frequencies (Mono Mode): Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz
  • Crossover Filter Type: Linkwitz-Riley, 24 dB/octave, state-variable
  • Low cut Switch: Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
  • Phase Invert Switch: Inverts the phase at the output, one switch per output.
  • x1 / x10 Switch: Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
  • Mode Switch: Selects stereo/mono and 2/3/4-way operation
  • LF Sum Switch: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2's low output phase invert LED to indicate that this output is not operational in the LF sum mode.
  • Indicators: Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
  • Operating Voltage: 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz
  • Operating Temperature: 32°F to 113°F (0°C to 45°C)
  • Power Consumption: 15W
  • Power Connector: IEC receptacle
  • Dimensions: 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
  • Unit Weight: 4.0 lbs. (1.8 kg)
  • Shipping Weight: 5.8 lbs. (2.6 kg)
  • XLR balanced ins and outs
  • Mode switches for mono 4-way or stereo 2-way/3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx® 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant
  • Only registered users can write reviews. Please, log in or register