ART SPLITMix4 Four Channel Passive Splitter/Mixer

Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications

Key Features:

  • Four Stereo Input Channels
  • Stereo Output
  • Independent stereo level controls are provided on each channel
  • Passive Design (No Power Supply Required)
  • Over 90dB of Attenuation

    view all ART products

    Product Code: 300022000

    Pre-Order from our next delivery

    Regular Price: £57.00

    Special Price £48.00

    The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.

    Independent stereo level controls are provided on each channel. All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use.

    The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.

    • Frequency Response 20Hz - 20kHz, +/-1dB
    • Total Harmonic Distortion <0.005% @ 1kHz (typical)
    • Phase Shift <10 degrees @ 20kHz
    • Input Impedance 25k -100k Ohms
    • Ouput Impedance 1k - 4k Ohms
    • Insertion Loss 12dB (typical)
    • Connectors 1/4-inch TRS stereo
    • Power Requirements Fully Passive
    • Maximum Attenuation > 90dB (typical)
    • Channel Isolation > 90dB (typical)
    • Dimensions 1.85" x 4.6" x 4.1" (47mm x 117mm x 104mm)
    • Weight 0.84 lbs (0.38 kg)
  • Four Stereo Input Channels
  • Stereo Output
  • Independent stereo level controls are provided on each channel
  • Passive Design (No Power Supply Required)
  • Over 90dB of Attenuation
  • Write a review for the ART SPLITMix4 Four Channel Passive Splitter/Mixer

    How do you rate this product? *

    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the ART SPLITMix4 Four Channel Passive Splitter/Mixer Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields