ART Dual Z-Direct Twin Channel Passive DI Box

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers

Key Features:

  • Fully passive, high performance transformer design. No battery required.
  • Converts 50k Ohm inputs into 600 Ohm balanced outputs
  • Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
  • Switchable phase invert
  • Switchable ground lift (fully isolates inputs from chassis and outputs)
  • Rugged extruded aluminum case

    view all ART products

    Product Code: 100072286

    Pre-Order from our next delivery

    Regular Price: £45.00

    Special Price £35.00

    The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4 inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect's audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
     
    Frequency Response 10 Hz - 50 kHz, ± 0.5dB @ +4 dBu
    Total Harmonic Distortion .01% Typical @ 1 kHz, +18 dBu
    <.05% @ 100 Hz,
    +18 dBu
    Channel Separation > 80 dB (typical)
    Input Connections 1/4" TRS Unbalanced (2), 50k Ohm
    Thru Connections 1/4" TRS (2)
    Output Connections XLR Male Balanced (2), 600 Ohm
    Input Attenuation Switchable, (0 -20, -40dB)
    Filter Type / Response Switchable, Low Pass, -3 dB @ 30 kHz
    Dimensions 1.85"H x 4.6"W x 3.9"D (47mm x 117mm x 99mm)
    Weight 0.88 lbs (0.40 kg)
    Fully passive, high performance transformer design. No battery required
    Converts 50k Ohm inputs into 600 Ohm balanced outputs
    Switchable input attenuation (0, -20, -40 dB)
    Switchable low pass filter
    Switchable phase invert
    Switchable ground lift (fully isolates inputs from chassis and outputs)
    XLR connectors for balanced outputs
    Rugged extruded aluminum case
    Frequency Response: 10 Hz - 50 kHz, ± 0.5 dB @ +4 dBu
    THD: 0.01% typical @ 1 kHz, +18 dBu / <.05 hz="" dbu="">Channel Separation: > 80 dB (typical)
    Input Connections: 1/4" TRS unbalanced (2), 50 k Ohm
    Thru Connections: 1/4" TRS (2)
    Output Connections: XLR male (2), 600 Ohm
    Input Attenuation: Switchable, (0, -20, -40 dB)
    Filter Type / Response: Switchable, low pass, -3 dB @ 30 kHz
    Dimensions (DWH inches): 3.9 x 4.6 x 1.85
    Dimensions (DWH mm): 99 x 117 x 47
    Weight: 0.88lbs / 0.40kg

    Write a review for the ART Dual Z-Direct Twin Channel Passive DI Box

    How do you rate this product? *

    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the ART Dual Z-Direct Twin Channel Passive DI Box Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields