ART Dual X-Direct Twin Channel Active DI Box

The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs.

Key Features:

  • Fully Active Design
  • Phantom Voltage or 9v Battery Powered
  • Converts High-Impedance Balanced / Unbalanced Inputs Into 600 Ohm Balanced Outputs
  • Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
  • Switchable phase invert
  • Switchable ground lift (fully isolates inputs from chassis and outputs)
  • ¼-Inch TRS | XLR Combi Jack Inputs

    view all ART products

    Product Code: 100072276

    Want delivery on Mon 9th of Dec? Order in the next and select Next Day Delivery.

    Availability: Low Stock!!

    £60.00

    The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

    Frequency Response 10 Hz - 100 kHz, ± 0.5 dB @ +0 dBu
    Total Harmonic Distortion <.05% (typical)
    Dynamic Range >100 dB (typical)
    Channel Separation > 80 dB (typical)
    Maximum Input Level +4, +34 dBu
    Maximum Output Level +6 dBu (battery powered), +14 dBu (phantom powered)
    Input Connections ¼-inch TRS | XLR female balanced / unbalanced (2), 470k Ohm
    Thru Connections ¼-inch TRS (2)
    Output Connections XLR male balanced (2), <600 Ohm
    Input Attenuation Switchable, (0, -30 dB)
    Power Requirements 9V @ 7.5 mA (battery,Alkaline recommended),
    18 - 48V DC @ 6.4 mA (phantom power, per channel)
    Dimensions 1.85"H x 4.6"W x 3.9"D (47mm x 117mm x 99mm)
    Weight 0.84 lbs (0.38 kg)
     
  • Fully Active Design
  • Phantom Voltage or 9v Battery Powered
  • Converts High-Impedance Balanced / Unbalanced Inputs Into 600 Ohm Balanced Outputs
  • Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
  • Switchable phase invert
  • Switchable ground lift (fully isolates inputs from chassis and outputs)
  • ¼-Inch TRS | XLR Combi Jack Inputs
  • Rugged Extruded Aluminum Case
  • Write a review for the ART Dual X-Direct Twin Channel Active DI Box

    How do you rate this product? *

    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the ART Dual X-Direct Twin Channel Active DI Box Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields