Pay4Later

Buy the DBX 223XS with INTEREST FREE FINANCE

Spend £ 308 more to qualify for payment by finance.

DBX 223XS

DBX 223XS Stereo 2-Way/Mono 3-Way Crossover with XLR Connectors

    view all DBX products

    Product Code: 100083306

    Want delivery on Wed 25th of Oct? Order in the next and select Next Day Delivery.

    Availability: Low Stock!!

    Last 1 left!

    £192.00
    "The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound."
  • Input Connectors XLR (pin 2 hot)
  • Input Type Electronically balanced/unbalanced, RF filtered
  • Input Impedance Balanced >50k ohm, unbalanced >25k ohm
  • Max Input >+22dBu balanced or unbalanced
  • CMRR >40dB, typically >55dB at 1kHz
  • Output Connectors XLR
  • Output Type Impedance-balanaced/unbalanced, RF filtered
  • Output Impedance Balanced 200 ohm, unbalanced 100 ohm
  • Max Output >+21dBu balanced/unbalanced into 2k ohms or greater
  • Bandwidth 20Hz to 20kHz, +/-0.5dB
  • Frequency Response 90 kHz, +0/-3 dB
  • Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth
  • Signal-to-Noise (Stereo Mode) >94dB (Low Output), >91dB (High Output)
  • Signal-to-Noise (Mono Mode) >94dB (Low Output), >93dB (Mid Output), >91dB (High Output)
  • Dynamic Range > 106 dB, unweighted, any output
  • THD+Noise
  • Interchannel Crosstalk
  • Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable
  • Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
  • Phase Invert Switch Inverts the phase at the output, one switch per output.
  • x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
  • Mode Switch Selects stereo/mono and 2/3-way operation
  • LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2?s low output phase invert LED to indicate that this output is not operational in the LF sum mode.
  • Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
  • Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
  • Operating Temperature 32°F to 113°F (0°C to 45°C)
  • Power Consumption 15W
  • Power Connector IEC receptacle
  • Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
  • Unit Weight 3.7 lbs. (1.7 kg)
  • Shipping Weight 5.4 lbs. (2.5 kg)
  • XLR balanced ins and outs
  • Mode switch for stereo 2-way or mono 3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx® 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant
  • Spend £ 308 more to qualify for payment by finance.

    Write a review for the DBX 223XS

    How do you rate this product? *

    • Price
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Value
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star
    • Quality
      1 1 star
      1 1 star
      1 1 star
      1 1 star
      1 1 star

    Seen the DBX 223XS Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields