NUMARK M4

The M4 mixer from Numark is a three channel scratch mixer with a total of six switchable inputs as well as a 1/4" jack mic input with it´s own dedicated EQ section.

Designed to accomodate the most demanding of DJ setups, the M4 can run three different decks (two turntables only) at once and can connect up to six via its six stereo phone inputs.

The mixer features steep 3 band EQ kills for tight mixing and EQ drop outs and a master and record out for sending your mixes to a recorder.

The Numark M4 is the perfect solution for DJ´s who want to take their mixes to the next level at amazing value for money.

Three-channel tabletop mixer

Inputs: two phono/line switchable (RCA), four line (RCA), mic (1/4")

Outputs: Master (RCA), Record (RCA), headphone (1/4" stereo)

Steep three-band EQ/rotary kills on each channel

Microphone input with EQ

Six-segment LED display for monitoring signal strength

Toggle for master and PFL metering

Replaceable crossfader with reverse and slope controls

Inputs:

Line: 10K ohm input impedance; 80mV RMS sensitivity for 0dB output

Mic: 600 ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input

Phono: 47k ohm input impedance; 1.3mV RMS sensitivity @ 1kHz for 0dB output


Outputs:

Line: 7V RMS max

Headphone: 0.5W into 47ohm


Signal to Noise Ratio (maximum output JIS-A weighted):

Line: Better than 100dB

Mic: Better than 95dB

Phono: Better than 85dB


Distortion: Less than 0.05%

Frequency response:

Line: 20 - 20,000 Hz ±0.5dB

Mic: 20 - 15,000 Hz ±0.5dB

Phono: ±1dB; -3dB attenuation at 20 Hz to reduce rumble and feedback


Channel Equalizer:

Bass: +12 / -35dB at 20 Hz

Mid: +12 / -25dB at 1.3 kHz

Treble: +12 / -20dB at 15 kHz


Channel fader kill: Better than 90dB at 1 kHz

Crossfader kill: Better than 75dB

Crosstalk: Better than 80dB at 1 kHz